Last 5 Products Reviewed
Edwards XDS46i scroll vacuum pump 100-120/200-230V, 1-ph, 50/60Hz with an IEC60320 connector, factory set to 230V A73101983
Edwards XDS46i scroll vacuum pump 100-120/200-230V, 1-ph, 50/60Hz with an IEC60320 connector, factory set to 230V A73101983
The XDS46i is optimized for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar making it ideally suited for LCMS and ICPMS applications requiring a higher pumping speed than that offered by the XDS35i.
Features and Benefits
- Lubricant-free within the vacuum envelope and hermetically sealed means totally clean and dry vacuum to prevent cross contamination
- No atmosphere to vacuum shaft seals means bearings are completely isolated, this prevents process attack and mean bearings run cooler and last longer
- No oil changes required eliminating costs of contaminated oil disposal
- Simple single sided scroll design means maintenance is done in minutes for low cost of ownership and maximum up-time
- Inverter drive for consistent pumping speed at 50/60Hz
Applications
- Clean pumping applications
- Automotive
- Beam lines and high energy physics
- Centrifuges, ultra high speed
- Coating
- ICPMS inlet
- Coating
- High throughput - LCMS
| Displacement 50 or 60Hz | 60 m3h-1 / 35 ft3min-1 |
| Peak pumping speed 50 or 60Hz | 40 m3h-1 / 23.5 ft3min-1 |
| Ultimate vacuum (Total pressure) | 5 x 10-2 mbar / 4 x 10-2 Torr |
| Max continuous inlet pressure | 40 mbar / 30 Torr |
| Max continuous outlet pressure | 0.2 bar gauge / 2.9 psig |
| Max allowed inlet and GB pressure | 0.5 bar gauge / 7 psig |
| Motor power | 0.52kW |
| Power connector | IEC EN60320 C19 |
| Nominal rotation speed | 1750 rpm |
| Weight | 48 kg / 105 lb |
| Inlet flange | NW40 |
| Exhaust flange | NW25 |
| Noise level | 55.4 dB (A) |
| Vibration | <4.5mms -1 (rms) |
| Leak tightness (static) | <1 x 10-6 mbar ls-1 |
| Operating temperature range | 10 to 40 °C / 50 to 104 °F |
Edwards XDS46i scroll vacuum pump 100-120/200-230V, 1-ph, 50/60Hz with an IEC60320 connector, factory set to 230V A73101983
The XDS46i is optimized for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar making it ideally suited for LCMS and ICPMS applications requiring a higher pumping speed than that offered by the XDS35i.
Features and Benefits
- Lubricant-free within the vacuum envelope and hermetically sealed means totally clean and dry vacuum to prevent cross contamination
- No atmosphere to vacuum shaft seals means bearings are completely isolated, this prevents process attack and mean bearings run cooler and last longer
- No oil changes required eliminating costs of contaminated oil disposal
- Simple single sided scroll design means maintenance is done in minutes for low cost of ownership and maximum up-time
- Inverter drive for consistent pumping speed at 50/60Hz
Applications
- Clean pumping applications
- Automotive
- Beam lines and high energy physics
- Centrifuges, ultra high speed
- Coating
- ICPMS inlet
- Coating
- High throughput - LCMS
| Displacement 50 or 60Hz | 60 m3h-1 / 35 ft3min-1 |
| Peak pumping speed 50 or 60Hz | 40 m3h-1 / 23.5 ft3min-1 |
| Ultimate vacuum (Total pressure) | 5 x 10-2 mbar / 4 x 10-2 Torr |
| Max continuous inlet pressure | 40 mbar / 30 Torr |
| Max continuous outlet pressure | 0.2 bar gauge / 2.9 psig |
| Max allowed inlet and GB pressure | 0.5 bar gauge / 7 psig |
| Motor power | 0.52kW |
| Power connector | IEC EN60320 C19 |
| Nominal rotation speed | 1750 rpm |
| Weight | 48 kg / 105 lb |
| Inlet flange | NW40 |
| Exhaust flange | NW25 |
| Noise level | 55.4 dB (A) |
| Vibration | <4.5mms -1 (rms) |
| Leak tightness (static) | <1 x 10-6 mbar ls-1 |
| Operating temperature range | 10 to 40 °C / 50 to 104 °F |